Search the forum,

Discuss Low pressure around house in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
29
I'm trying to track down the cause of low pressure around our new to us house. I've measured the output, thanks to the advice on this forum, and its around 10 secs per litre. I'm attaching a few photos of my cylinder. if someones having a shower and I run a cold tap then the temperature changes quickly!
Any advice appreciated.
 

Attachments

  • cylinder 2.jpg
    cylinder 2.jpg
    137.9 KB · Views: 8
  • cylinder 3.jpg
    cylinder 3.jpg
    148.6 KB · Views: 9
  • cylinder4.jpg
    cylinder4.jpg
    177.6 KB · Views: 10
  • cylinder.jpg
    cylinder.jpg
    123 KB · Views: 11
As i've said in a previous post the incoming strainer is probably blocked and possibly a faulty PRV. You need to get an Engineer in to take a look.
 

Reply to Low pressure around house in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock