Search the forum,

Discuss Low hot water presdure in the DIY Plumbing Forum area at PlumbersForums.net

Messages
18
Hello people hope your all well

Need some advice . I had a new boiler installed got a MAIN eco elite combi boiler . I previously had a glowworm boiler.
Issue I have is since the new boiler has been installed the water pressure for hot water has significantly reduced ! With the glow worm boiler the water pressure if anything Was too much .

Any ideas what could be causing this does a tap on the boiler or something need opening more . I have attached a pic
 

Attachments

  • 20210228_124821.jpg
    20210228_124821.jpg
    324.1 KB · Views: 5
  • 20210228_124826.jpg
    20210228_124826.jpg
    462.1 KB · Views: 5
  • 20210228_124830.jpg
    20210228_124830.jpg
    307.8 KB · Views: 5
What glow worm did you have? Could be the restriction set by the boiler. Check your stopcock is fully open. All valves underneath appear ok.
 
Unlikely pressure, its prob flow thats restricted. If you can time how long it takes to fill a 4 pint jug with hot and cold (for comparison) then we'll have a much better idea of where your at.
 

Reply to Low hot water presdure in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
3
Views
130
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
147
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
5
Views
125
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
128
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
250
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock