Search the forum,

Discuss Leaky sink in London, Chrome trap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
2
Hi all,
Gonna tackle a leaking sink (appears to drip from porcelain seal / top trap collar).
Reading previous replies to similar issues. will strip & clean everything.
Question is: Can I use a 'descaled' to help remove any stubborn limescale on threads & washers?
Thanks in advance ScruffyStu.
 
Normally a quick wire brushing / stiff brush gets most off

If it's the top that's leaking sounds like you need to remove the seal if one and replace with plumbers mate
 
Thanks,
It’s Chrome so I used a softer descaling vinegar soloution and almost all of it came off.
The sink seal was good just needed cleaned and refitted.
After dismantling the trap two seals had perished and needed replaced. The units is an Aston Mathews thing...completely proprietary parts and sizes & they replaced the whole thing for free!
On the train back now to fit the shiny new trap that now uses ‘O’ rings instead of non standard seals. Hopefully this new system will be something that’ll be easier to source for future replacement.
I knew I bought my strap wrenches for a good reason , they work a treat removing and replacing the chrome unit with no marks at all :).
 
Status
Not open for further replies.

Reply to Leaky sink in London, Chrome trap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
A while ago I replaced a leaky, corroded sink trap. That all appears to be fine, I can't find any leaks with it, and everything under the sink appears to be consistently dry. The problem I have is that there appears to be a leak where the waste pipe out from the bottle trap meets the wall...
Replies
2
Views
495
C
Hi I have a sink that has the basin plus another smaller basin next to it, think it is a 1/4 of the size of the main basin. The unit comes up through one hole, has 2 taps that turn and the unit can swivel to go to either basin. The taps have 4 prongs that can be turned (sorry not technical)...
Replies
2
Views
890
Hi I am not sure whether I have posted correctly earlier today, if so please forgive me as I am trying again just in case. I have a sink that has the basin plus another smaller basin next to it, think it is a 1/4 of the size of the main basin. The unit comes up through one hole, has 2 taps...
Replies
2
Views
705
Hello all, We had a new bathroom fitted 3 years ago and the sink blocked up recently, tried to clear it my self (removed basin trap but turned out the gunk was solid in the waste pipe and wasn't budging) got emergency home cover with my house insurance and they sent dynorod out and the feller...
Replies
6
Views
2K
Hello, I am stumped on this after spending hours trying and retrying to make resolve a leak. I installed an RKF CWF028-MB bathroom Faucet fixture. I can't get it to stop leaking between the jam nut and threads on the drain tailpiece. I've included two pictures. Everything else is fine. I've...
Replies
12
Views
3K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock