Search the forum,

Discuss Leaky Gledhill expansion relief valve in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
54
Hi

I have a leaky Gledhill expansion relief valve block a little like this one with the same spec 3bar on the black input and 4.5 bar on the red expansion relief value. It protects a 250L Gledhill unvented tank. All the input pipes have isolation valves so pretty easy to exchange components

How much should it cost to replace the components and manpower for the job assume G3 qualified?

Best

Matt

1635263217887.png
 

Attachments

  • 1635263171228.png
    1635263171228.png
    199.9 KB · Views: 2
its the old “ piece of string “ one mate .
location in uk
location in relation for how far plumber has to travel to and from the job .
Do the iso valves work .
is the inlet control set above the cylinder ( important one )
etc etc etc
 

Reply to Leaky Gledhill expansion relief valve in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock