Hi all,
Got a customer with a leaking expansion vessel on the solar thermal side of the system that is installed.
The solar thermal system is a Kingspan solarplus with a flat roof collector and the expansion vessel has started to leak on the weld area.
There is an indirect solar tank by kingspan that is augmented by a Ideal Logic heat 15 boiler and both the expansion vessels on this are fine with correct pressure and no leaks apparent
As I am G3 registered am I allow to change this vessel or is it a more specialized job.
I have also contacted kingspan direct and awaiting contact back from them for tech advice.
Any advice as always appreciated,
Thanks,
Andy
Got a customer with a leaking expansion vessel on the solar thermal side of the system that is installed.
The solar thermal system is a Kingspan solarplus with a flat roof collector and the expansion vessel has started to leak on the weld area.
There is an indirect solar tank by kingspan that is augmented by a Ideal Logic heat 15 boiler and both the expansion vessels on this are fine with correct pressure and no leaks apparent
As I am G3 registered am I allow to change this vessel or is it a more specialized job.
I have also contacted kingspan direct and awaiting contact back from them for tech advice.
Any advice as always appreciated,
Thanks,
Andy