Search the forum,

Discuss Leaking Howden's Atomix monobloc tap 2431. in the USA area at PlumbersForums.net

It's leaking beads through the top of the swivel ring, but I don't think from the base.

I've replaced the valve cartridge, but no change.

Help, please. If the whole tap needs tightening from below, what are the tools?

Pictures of tap above sink and of connection below.

Thanks.

Dave.
1 Mixer tap.JPG
2 Leaking joint.JPG
3 Tap base.JPG
 
1. Probably the seals / O rings in the swivel part.
2. Its a long time since I worked on one of these, but from memory I think you have to take the tap out to get at the swivel parts. Worth trying from above to save the faff.
 
Not worth repairing, it has to come out and you need the right kit for the tap. Cheaper to replace with a new guarantee, same labour charge.
 
Thanks. What kit would I need for the removal?
The tap will have to be removed from the sink to repair it, and from your photo it is soldered pipework not compression. So unless you can solder or you want to change the tap tails to compression/ push fittings it may not be a job you can do yourself. A new tap comes with new tails most likely flexible compression pipes. You might pay £7-8 for a new seal kit, maybe another £7-10 for new hoses or more. I would fit a new tap. It can be repaired if you can do the work yourself but you won't get the new o'rings for your tap off the shelf. You will need a set of box spanners like this.
Rothenberger Monoblock Tap Spanner Set 3 Piece Set - https://www.NoLinkingToThis/p/rothenberger-monoblock-tap-spanner-set-3-piece-set/40102?tc=AC1&ds_kid=92700055262507126&ds_rl=1244066&gclid=CjwKCAiAlrSPBhBaEiwAuLSDUKEGXV56T-oz-OoLh2muDf_LoBSq3uVGfz_brYNVNG54cdXAzW7Z7RoCtGYQAvD_BwE&gclsrc=aw.ds more cost and you might only use once.
 

Reply to Leaking Howden's Atomix monobloc tap 2431. in the USA area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
196
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock