Search the forum,

Discuss Leaking Bath Mixer Tap in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
9
I'm probably missing something obvious, would welcome any suggestions on how I get access to the washers.

We have a matching bathroom suite and the bathroom sink mixer was a breeze to fix. The top of the taps popped off easy enough and the "collars" could be removed to expose a nut to unscrew the cartridge.

The bath is proving a lot more challenging. I've loosened the grub screw to remove what is a small collar but that doesn't appear to be of any real help. I'm not sure why it's there unless I am missing something. I presumed these were of a similar cartridge type and I could fix the washers as per the sink mixer tap.

Hopefully the pictures help explain. They and the bath have now been cleaned up 😊 I hope it doesn't mean accessing from below as the bath panel is held in place with silicone and was a pain to fit perfectly back in place after I repainted it.

Tap1.jpg


Tap2.jpg
 

Reply to Leaking Bath Mixer Tap in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock