Search the forum,

L2 logic heat 12

Discuss L2 logic heat 12 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Jambo87

Jambo87

Messages
7
Attended job today on logic heat 12, l2 fault code. 240v present at spark gen and electrodes in decent condition. Replaced spark gen and electrodes but still getting l2. Earth fine on electrodes and continuity ok through spark lead. Also tried different spark gen incase faulty but still no spark. Even if continuity is ok on lead could this still cause issue.
 
Good evening mate. You need to PM @ShaunCorbs your gas details for him to get you access to the correct areas of the forum. We cannot give gas related advice on an open forum. Sorry I’m advance.

Please like this post if you found it helpful.
 

Reply to L2 logic heat 12 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Cm19820
Logic Heat 15 problem
Hi all, having an issue with a Logic Heat Only. On a few occasions early this year the boiler was going to fault code L2/F2. The electrodes, gas valve, sump, syphon, and spark gen were replaced. All was well for a few weeks until it happened again, then the fan was replaced. All fine until now...
Replies
1
Views
2K
Deleted member 120897
D
K
  • Locked
No hot water if the heating is running, but otherwise okay.
I have a strange fault with a Vaillant EcoTec combi-boiler. It's 100% reliable whenever the heating is called for, ie. by the room-stats. It's also 100% reliable when hot water is called for, ie. hot tap or shower, as long as the heating isn't running at the time. But if the heating is already...
Replies
7
Views
894
ShaunCorbs
ShaunCorbs
F
Constant Lockout issue with Ideal Concord CXS/SD40/H
In our Village Hall we have a Ideal Concord CXS/SD40/H central heating boiler. This was installed new when we had an extension built and the existing boiler needed upgrading. The Mechanical Engineers advising the architect insisted that we had a conventional cast iron combustion chamber boiler...
Replies
10
Views
1K
FozzieBear
F
P
Ideal Logic Combi 35 constant F1 fault
Got up on Wednesday morning no hot water, (only cold water coming out of hot tap). Checked boiler, it had zero pressure and F1 fault showing. So I refilled the pressure using the filling loop, up to about 1bar which is where it usually is, which worked fine, had hot water all day. Same thing...
Replies
16
Views
1K
exedon2
exedon2
W
Ideal Logic Combi 35
Hi all, I've got a bit of a strange issue relating to my Ideal Logic Combi 35 which has recently started displaying a F2 error when trying to use the central heating system. The boiler works fine when using hot water, however when I try to turn on the central heating system the boiler works...
Replies
2
Views
963
Williams25
W
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock