Search the forum,

Kitchen mixer tap support

Discuss Kitchen mixer tap support in the Plumbing Jobs | The Job-board area at PlumbersForums.net

N

Nnn

Messages
3
Hi

What is a good tap support to use for a replacement kitchen mixer tap?

Are the Sauer ones good and simple enough to install? There are two types of the sauer ones- circlip or full circle support.

The Franke support gets mixed reviews (no pun intended)
 

Reply to Kitchen mixer tap support in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
  • Question
Help with Franke Planar tap
Hello I have a Franke Planar Kitchen tap and it’s got a leak. One drop per minute. I’ve been on YouTube and seen that there are grub screws to remove, first for the handle, then once that is off the square piece between the handle and the tap body to get the cartridge for replacement. I have...
Replies
1
Views
144
Rtplumb
R
M
Non return valve failure?
Hi there, All was good until one day the hot water suddenly started running quite a lot cooler. Putting my hand on the output at the boiler it's still hot there so I'm guessing there's a problem with cold water feeding into the hot water somewhere along the line. I have mixer taps on two...
Replies
2
Views
219
mrstevejm
M
A
How do I remove a rounded off screw from kitchen mixer tap?
I need to replace the washer of my kitchen mixer tap as it is leaking. I was able to remove the spout once by unscrewing the screw on the back of the tap. However now I can't remove it again as it seems I must have used the wrong screw head and have rounded off the head. Please see attached...
Replies
9
Views
379
Ben-gee
B
B
Dripping tap in my kitchen
I have a kitchen mixer tap with quarter turn levers and the cold side started dripping. I took out the ceramic valve and replaced it with one from Screwfix but it hasn’t solved the problem it still drips. Could it be a dodgy valve or is it something else? Thanks
Replies
5
Views
435
Belxvs
B
P
where to buy decent quality tap inserts-
quality product wanted, my 1/4 turn kitchen sink tap inserts need replacing and i am looking for ones with a spindle gland nut, rather than a circlip which previous experiance says won't last five minutes. as the circlip either weakens or wears out. none of the ironmongery supermarkets appear...
Replies
0
Views
161
Pete Williams
P
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock