Search the forum,

Kamco CF40 & CF90 Power Flush Machines Now In Stock !

Discuss Kamco CF40 & CF90 Power Flush Machines Now In Stock ! in the USA area at PlumbersForums.net

CorgiDirect

CorgiDirect

Messages
337
Kamco CF40 & CF90 Power Flush Machines Now in Stock! Due to Popular Demand. Order Today While Stock Lasts

Power Flush Machines - CorgiDirect - https://corgi-direct.com/power-flush-machines-18089-0000

kamco-clearflow-cf902-quantum-2-power-03420868L.jpg


kamco-clearflow-cf40-evolution-power-03420966L.jpg
​
 

Reply to Kamco CF40 & CF90 Power Flush Machines Now In Stock ! in the USA area at PlumbersForums.net

Similar plumbing topics

Uheat - Jacob
    • Like
  • Sticky
Uheat's NEW Cordless Press Tools
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications. Just reply to this thread...
Replies
5
Views
854
Lou
Lou
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
236
oz-plumber
O
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
217
DIwhYdidIstartThis
D
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
227
Chuck
C
M
Unvented discharge at high level current regs
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
226
Matt0029
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock