Search the forum,

Is worth my while doing solar thermal????

Discuss Is worth my while doing solar thermal???? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

moogwai

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,343
Im off to Vaillant in leeds on tuesday to do the solar thermal course......I'm now beginning to wonder if its really going to be worth it if its so hard and expensive to become MCS...
.what do u guys think? There's only me and my mucka so in no way are we a big firm.
Any input would be welcomed.

Sent from my MB526 using Tapatalk
 
If you are new to solar stuff it is a good course. You will learn a bit and get a certificate at the end of it. As for the MCS i wouldn't bother with that unless you have money to waste.
 
Status
Not open for further replies.

Reply to Is worth my while doing solar thermal???? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
227
Chuck
C
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
230
exedon2
exedon2
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
152
mutley racers
M
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
73
Lou
Lou
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
386
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock