Search the forum,

Discuss Is replacing a bathroom suite notifiable to bc in the Ireland area at PlumbersForums.net

Messages
54
If you change the position of the sanitary wear or add a none electric shower.
 
 
Any structural work to accommodate the wastes for the loo and new shower?

Think also about ventilation for the new shower, where will that run?

Cheers,

Roy
 
It’s a maybe then. The only change will be a bossed 40mm pipe into external soil stack. That is possibly notifiable
Does the w/c have a macerator then if only connection 40mm. Also is that 40mm under the floor? Which way do joists run.

In general there is more expertise than might first be apparent in getting wastes correct (especially as you add more stuff) do ,I'd want professional advice.

Can you include some pics and more description.

Cheers,
Roy
[automerge]1606912157[/automerge]
Does the w/c have a macerator then if the only connection is 40mm. Also is that 40mm under the floor? Which way do joists run?

In general there is more expertise than might first be apparent in getting wastes correct (especially as you add more stuff) , so I'd want professional advice.

Can you include some pics and more description perhaps.

Cheers,
Roy
 
Does the w/c have a macerator then if only connection 40mm. Also is that 40mm under the floor? Which way do joists run.

In general there is more expertise than might first be apparent in getting wastes correct (especially as you add more stuff) do ,I'd want professional advice.

Can you include some pics and more description.

Cheers,
Roy
[automerge]1606912157[/automerge]

Will do thank you. It’s not so much doing the work but if I need bc approval to do it.
 

Reply to Is replacing a bathroom suite notifiable to bc in the Ireland area at PlumbersForums.net

Similar plumbing topics

I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
205
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
202
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
108
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
59
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock