Intergas HRE 28/24 Combi boiler on Melamine/Ply board?

[John Stocks]

Hi all,

I have tried to email Intergas about this and they still haven't got back to me!!

I have a plumber installing a new boiler and want to know if i need to remove the melamine board the previous boiler was on and fit a ply board then cover with plasterboard to get over the combustible side of things under building regs.

i know some boilers are able to be fitted to ply board but the manufacturers have to state this and i can't seem to get an answer from Intergas.

I'm a sparky (don't hate me!) but it's my own house so want to try and do as much as i can for the plumber before he gets there because he's on mates rates!!

 

[ShaunCorbs]

No it’s fine

Condensing boilers can be fitted on combustible surfaces due to the lower flue temps

 

[Harvest Fields]

As above it should not make a difference.

 

[Riley]

Let’s have a three way mod agreement nothing to worry about

 

[snowhead]

Make sure the Mates rates include registering it and filling in the Benchmark Checklist.

 

[Scott_D]

Is it string enough to take the weight?

 

[rpm]

Let’s have a three way mod agreement nothing to worry about

Viva the 3 amigo`s eh?

 

[Riley]

But far less funny

 

[hammers4spanner]

I would be more concerned about the boiler bag of sheet