From the United States of America? - Checkout our specific plumbing forum for you:USA Plumbing Forum

Discuss Intergas 30 sb fault code 11 in the Gas Engineers Forum area at PlumbersForums.net

Inverness

Plumber
Gas Engineer
Hi guys, commissioned a Intergas ssyem boiler today. Work fine until later on it went to lock out code11?

I know the combi Intergas boilers require to set the parameters for a combi but does this boiler need to beset for a system boiler?

Nothing states in the manual about setting the parameters for this boiler..

I've checked the circulation sensors are all the way in there pockets.

I don't normally install Intergas boilers.

All help appreciated!
 

Brambles

Advent Win
The likely issue if this is a new instal is insufficient circulation. If it is existing that has previously worked well, a defective sensor (S1 or S2) whichever is on circulation.

With respect to setup, the MI’s work through the required settings in a logical way. Are you sure that you are working from the installation and not the user manual?

Intergas technical support are very good if you are really stuck.
 

ShaunCorbs

Staff member
S. Mod
Plumber
Gas Engineer
System isn’t air locked / you have flow ?
 

ShaunCorbs

Staff member
S. Mod
Plumber
Gas Engineer
Would leave it a day and see if it returns if it does I would phone intergas up for maybe a chat and warranty call out
 

Reply to Intergas 30 sb fault code 11 in the Gas Engineers Forum area at PlumbersForums.net. Plumbing questions, answers, tips and tricks.

Shower Power Booster | PlumbersForums.net Official Sponsor
This official sponsor may provide discounts for members
Plumbing Advice - Find Plumbers Jobs
Test4Less PlumbersForums.net Sponsor
uHeat Forum Sponsor - PlumbersForums.net
Power Shower Booster - Official PlumbersForums.net Sponsor
Bulk Workwear - Workwear Sponsor for Plumbers Forums
Corgi Direct - Plumbers Forums Sponsor
Wetroom Store - PlumbersForums.net Sponsor

New Posts Threads Members

Top