Search the forum,

Discuss Info on Baths supplied by Dolphin Bathrooms in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

bobzie

I, to my eternal regret, had a bathroom fitted by Dolphin Bathrooms around 12 years ago. The front panel on the 'P' shaped bath is in urgent need of replacement but I cannot find any information as to the make or model of the bath. Any pointers as to the manufacturers of the baths that those Fishy F***s supplied would be much appreciated.
 
Most of them where ideal standard, I remember they where shocking to fit and usually cracked within 12 months, supposed its lasted 13 years, that's very good.
 
Thank you for the reply - yep, that sounds like the one. It's been cracking around the edge for a few years but I've managed to ignore it up until now! Thanks again
 
We actually had some panels repaired by a car body shop. They reinforced the back with fibreglass, filled the cracks and sprayed with a 2 pack gloss. Looked OK
 
We actually had some panels repaired by a car body shop. They reinforced the back with fibreglass, filled the cracks and sprayed with a 2 pack gloss. Looked OK

Great idea, thank you for that.
 
Status
Not open for further replies.

Reply to Info on Baths supplied by Dolphin Bathrooms in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
296
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
249
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
347
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock