Search the forum,

Discuss Importance of full servicing in the Gas Engineers Forum area at PlumbersForums.net

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,157
I carried out a full service on a Evo today I was a bit surprised to find so much debri in the sump for some reason this one slipped through the net last year and only got a safety check won't happen again 😉

Cheers kop
 

Attachments

  • IMG_20200427_110551.jpg
    IMG_20200427_110551.jpg
    215.1 KB · Views: 41
  • IMG_20200427_110638.jpg
    IMG_20200427_110638.jpg
    103.6 KB · Views: 41
  • IMG_20200427_110540.jpg
    IMG_20200427_110540.jpg
    69 KB · Views: 41
  • IMG_20200427_122007.jpg
    IMG_20200427_122007.jpg
    99.7 KB · Views: 40
Did you take the trap off underneath? They’re a bugger for getting blocked up then backs up into the sump
Yes mate I did remove the trap I cleaned it out I also flushed the heat exchanger through with water into a bowl , agreed bud it doesn't take much to block em up , do you think it's the heat exchanger being dissolved slightly by the acidic condense ? Kop
 
Yes mate I did remove the trap I cleaned it out I also flushed the heat exchanger through with water into a bowl , agreed bud it doesn't take much to block em up , do you think it's the heat exchanger being dissolved slightly by the acidic condense ? Kop

I would say it’s a possibility if the condensate pools inside the heat ex as a result of shoddy/improper servicing, as these isars/icos have always been susceptible to blockage if not serviced correctly I’ve replaced a few that have been leaking.
More likely these boiler on a monthly service contract where you pay 30quid a month just to have an fga stuck down the flue once a year, only to be told you need to stump up more cash to replace as yours is now “uneconomical to repair”
 

Reply to Importance of full servicing in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
256
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
223
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
176
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock