Discuss Ikea sink to waste problem in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Hey guys! I'm no DIY'er but have managed to replace our kitchen sink with a bigger one from ikea. I've done everything I can and now have the main grey ikea pipe into the pipe that leaves the property. The problem is that the connection between the grey ikea pipe and white...connector part leaks slightly and drips (please see attached). Can anyone advise on how to go about connecting it properly? I've just literally placed the pipe into the white connection, it doesn't seem to connect securely because of the ridges on the pipe. I've attached an image of the setup. Any advice is appreciated. Thank you.
Esteemed
Plumber
Subscribed
You are missing a part, it's probably on the waste on the old sink.
It's the compression nut like there is on the bottom of the white waste connector.
There should be a rubber taper washer with it.
Reply to Ikea sink to waste problem in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4 times since.
It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
