Search the forum,

Discuss ideal standard concord wrs 40, buzzing when heating the water. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
1
Our gas central heating boiler (30 plus years old (plus)) has developed a very load buzzing noise.
The noise starts whenever the boiler kicks in to bring the radiator water back up to temperature. (very occasionally the buzzing does not happen - but it is rare)
The boiler is used for heating the house, not tap water, and is situated next to the kitchen sink.
If this is the thermostat or gas valve - how can one tell & could they still be available ( I cannot actually see any part number labels). Also is it dangerous to use the boiler in its present condition.
As I understand it, when we replace the boiler we are going to have to have all the pipework replaced due to the current pipes not being the correct diameter, so preferably we would like to get the big job done in the spring. Following on we would like to keep the present boiler going till then.
IMG_20181220_164535_resized_20181220_044930208.jpg

This is a toe in the water exercise for background info, before I start contacting local Gas Safe techs/installers.
 
I know what it is straight away. It's many years since I enquired about spares but, at the time I could get some parts. It is best practice to get a GSR in to diagnose the fault. He will know who to go to locally to get the correct spares.
 

Reply to ideal standard concord wrs 40, buzzing when heating the water. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Have a sytem boiler with unvented cylinder with 2 heating zones plus hot water in a house we moved into recently. To start with we were always amazed at the water pressure so on the odd occasion that the water was only luke warm it was easily forgiven, but over time we have come to realise that...
Replies
8
Views
387
Hi, We moved into a new property yesterday and are a little baffled by the heating/water tank situation. The previous owners unhelpfully left any kind of instructions/manual and therefore trying to figure out ourselves. We have what looks like a boiler/water tank system (coming from a standard...
Replies
3
Views
306
Hi I'm dealing with Vaillant Ecotec 824 R1 in one flat. The boiler make a very loud noise when central heating is on - this is random and occurs mostly at night. I'm sharing video showing the problem: So far we changed: 1. Expansion vessel 2. Pump 3. Water pressure gauge - analogue sensor...
Replies
0
Views
408
My heating system comprises an Ideal Logic 12 boiler located downstairs and a Gledhill OV SOL cylinder located upstairs . The problem is that when the Gledhill controls for the “hot water” and “central heading” are turned on the Ideal boiler makes a constant “clicking” noise and tries to start...
Replies
1
Views
474
I just had a quote for a new boiler install as follows I dont undertand why a 15-60 boiler pump is needed and a 25-100 pump is needed as well I currently have an ideal mexico 2 heat only boiler - It has one DAB pump on the boiler return and a 2 port valve at the flow pipe to allow for heating...
Replies
3
Views
538
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock