Search the forum,

Discuss Ideal instinct boiler and central heating questions in the Central Heating Forum area at PlumbersForums.net

Messages
2
Hi,

I have ideal instinct boiler and central heating in a house. I have 3 simple questions regarding the boiler, central heating. Because of the certain circumstances I never need hot water in the property, and I only need to heat the property during the winter months.
Boiler operates in 3 modes; ''off'', ''summer mode'' (in this mode it only heats domestic water) and ''winter mode'' (in this mode it heats domestic water and provides central heating).
The questions are:

1. Is it necessary to have electricity supply to the boiler on all year round? In the manual it says it needs to be on all the time: ''The boiler mains power supply must be left on to enable frost protection''. Can actually anything happen to the boiler if mains power supply is off for a good half a year or even longer (for example during spring, summer, autumn)?

2. Can anything bad happen to the boiler if I never run hot water even if it heats it? Cause in ''winter mode'' (the only mode that I use) it does heat domestic water and provides central heating at a same time even if I don't need hot water.

3. Can anything bad happen to certain radiators (in a long run) if they are turned off all the time? I only need some of the radiators on.
 
It sounds like you have a combination boiler, which if left in winter mode, it only heats a tap on demand, unless you have the preheat function activated. Leaving it turned off should be ok, but I do know some older boilers pcb’s/fans don’t like it.

If it’s heating the water, as long as there’s somewhere to dissipate the heat, then all is good.

only thing that may happen on rads turned off for long periods is the trv (if fitte) may sieze.
 

Reply to Ideal instinct boiler and central heating questions in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
233
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
384
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
304
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
253
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
216
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock