Search the forum,

Discuss Ideal 30 Low Water Pressure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

jsm

Messages
25
Hi
Removed radiator from wall for decorating, then refilled and bleed all Radiators.
System now saying low water pressure
Boiler saying
1. Fill System to 1 bar.. although after topping up now showing 1.5bar
2. Bleed radiators - done all
3. Contact Installer!!..
Is there anything i can do check before calling out plumber?
Thanks
 
What sometimes helps is give the boiler a right or left hand hook.
Sounds like a pressure switch problem.
Th hook may fix it
 
Fill more water into system.
You could either have a faulty pressure gauge or a faulty pressure sensor or both.
Keep adding water slowly until something happens - or until water passes through the pressure relief valve.
If it gets to the stage of passing through the relief valve you have a problem that you cannot fix - you need professional help to remedy the problem
 
Turn it off and back on again ? (Power)
 
If the pressure gauge is under the boiler, tap it with handle of a screwdriver and see if the needle drops back round to zero;)
 

Reply to Ideal 30 Low Water Pressure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock