Search the forum,

I need to replace my old Danfoss head valve help appreciated

Discuss I need to replace my old Danfoss head valve help appreciated in the USA area at PlumbersForums.net

D

DrNo2021

Messages
3
973EFA71-AA59-45CD-8BEB-F2063EF0DB68.jpeg
Hi guys, my head valves of my radiators have broken teeth and need replacing. The diameter size is about 25/26 mm. The old ones are Danfoss BS6284 which are discontinued. I am aware that I could change the whole TVR cheaper but I just want to buy the heads please.
Any help would be appreciated. Pictures attached.
 

Attachments

  • 865D4D5D-3D9A-4ED3-86E7-AB4C5D020E38.jpeg
    865D4D5D-3D9A-4ED3-86E7-AB4C5D020E38.jpeg
    233.2 KB · Views: 9
  • 71BEF172-7178-4E60-9C13-F2EED79CCA33.jpeg
    71BEF172-7178-4E60-9C13-F2EED79CCA33.jpeg
    249 KB · Views: 8

Reply to I need to replace my old Danfoss head valve help appreciated in the USA area at PlumbersForums.net

Similar plumbing topics

B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
180
ShaunCorbs
ShaunCorbs
N
Towel Rail Valve Advice please (35 Characters needed.)
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
166
Timmy D
T
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
225
Firefox
F
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
77
Lou
Lou
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
306
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock