Search the forum,

I have hot water everywhere but my showers. I have 2 bathrooms. Hot H2O fine everywhere else. Hot starts in showers but only lasts about 2 minutes.

Discuss I have hot water everywhere but my showers. I have 2 bathrooms. Hot H2O fine everywhere else. Hot starts in showers but only lasts about 2 minutes. in the USA area at PlumbersForums.net

F

Flyer72

Messages
2
I have old bathrooms. Two taps - one for cold, one for hot. No mixer taps. I have a Saxon Copperflow Truflow 140L hot water system. Both hot water taps couldn’t go on blink at same time. Do you think its my hot water system?
 

Attachments

  • 4EA464EE-B1F2-4161-AF30-9C5F362ED308.jpeg
    4EA464EE-B1F2-4161-AF30-9C5F362ED308.jpeg
    329.6 KB · Views: 10
  • D40B885A-797B-4B8A-8F33-35BD37A15B27.jpeg
    D40B885A-797B-4B8A-8F33-35BD37A15B27.jpeg
    635.3 KB · Views: 8
Unlikely to be the system if the rest of the taps are getting hot
 

Reply to I have hot water everywhere but my showers. I have 2 bathrooms. Hot H2O fine everywhere else. Hot starts in showers but only lasts about 2 minutes. in the USA area at PlumbersForums.net

Similar plumbing topics

P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Chuck
C
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
7
Views
183
cheddarman
C
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
205
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
108
ChrisGid
C
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
202
Firefox
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock