Discuss How to remove diverter valve handle and faceplate in the DIY Bathroom Remodelling Advice area at PlumbersForums.net

Messages
3
Reaction score
0
My shower hose connection has popped out of the diverter value

You can see it here: Imgur

I've found the manual for it, here: Imgur

But I have no idea how to remove the handle and faceplate so I can tighten the screw into the notch on the shower hose end connection.

Any ideas?
 
Shower Power Booster | PlumbersForums.net Official Sponsor
This official sponsor may provide discounts for members
Messages
241
Reaction score
85
If it were me, i’d Be looking under the white disc on the handle, see if it pops out or unscrews to reveal another screw which when unscrewed will allow you to remove the handle.
Then it looks as if the valve cover is just a push fit, maybe try to prise it out using the small notches either side?
Difficult to say for sure but I’d definitely look at that first
 

Reply to How to remove diverter valve handle and faceplate in the DIY Bathroom Remodelling Advice area at PlumbersForums.net

Plumbase - PlumbersForums.net Sponsor
Plumbing Advice - Find Plumbers Jobs
uHeat Forum Sponsor - PlumbersForums.net
Power Shower Booster - Official PlumbersForums.net Sponsor
Test4Less PlumbersForums.net Sponsor
Corgi Direct - Plumbers Forums Sponsor
Wetroom Store - PlumbersForums.net Sponsor

Test

Top Bottom