Search the forum,

Discuss How do I connect a diverter to a Grohe tap? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
7
Hello,

I’m trying to fit a diverter to a Grohe concetto single hole mixer tap. I have removed the aerator but cannot find any adapter that will fit as the opening is at an angle. The removed aerator is F22 female and screws onto plastic threads that look like a hexagon when looking up into the tap. I’m wondering if that plastic piece can be removed which may make the tap become a female connection instead (which I have an adapter for).

Any help is much appreciated.
 
May I ask why you need a diverter on a kitchen tap ?
 
No link ?
 
Sorry to say you can’t use a bidet attachment on mains water
 
It’s agains water safety rules
 
In short there not supposed to be used on mains water

normally used with a cold water tank etc
 
No sorry
 
That diverter is meant to replace an F22 aereator.

You will need to use an M22xM22 adaptor -https://www.aqua-techniques.fr/PBSCProduct.asp?ItmID=30025344&AccID=19102&PGFLngID=0&gclid=CjwKCAiAkJKCBhAyEiwAKQBCkvqBbpBjJhdAzfpKv1OEyJy%2DiI1v%5FBxsThH2r9dFIEpQbLa7DCMcnhoC4qQQAvD%5FBwE
 
As are all but twin flow "mixer taps" when used on mains water.
Some Polish plumbers have a Youtube video taking the P out of these mixer taps that don't mix.

that’s why you need to install double checks or the supplied valves which include back flow prevention
 
***.and why every other country in Europe just uses mains pressure balanced hot and cold water supplies, with the backflow protection at the water company's meter.

you can do that here and then install what you want you need to install a break tank and pump eg dab e systank and pump

then you can install what you want
 

Reply to How do I connect a diverter to a Grohe tap? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

I’m trying to replace a cartridge on a Grohe mixer tap but I can’t get beyond second stage! I have removed the grub screw,but cannot lift off the lever.I have applied some wd40 into the grub screw hole,..but the lever won’t budge. is there any other method for removing the tap lever?…help...
Replies
12
Views
2K
Hi I've purchased a GROHE | Euphoria 260 Exposed Shower ( looks nice ) however Im missing some initial connecting adapters the installation instructions say it comes with " easy install adapters " and threaded tape ....I have neither of these ,all I have is the " S " unions ... so I did a bit of...
Replies
18
Views
2K
I need to replace the washer of my kitchen mixer tap as it is leaking. I was able to remove the spout once by unscrewing the screw on the back of the tap. However now I can't remove it again as it seems I must have used the wrong screw head and have rounded off the head. Please see attached...
Replies
9
Views
377
Hi learned friends. A "plumber" has installed a shower for my daughter. However it doesnt look right. This part circled isnt on any pictures I've found of the shower on the internet. It looks like a hex key may fit the inside? The picture on the right is how it should look. I've no idea why...
Replies
5
Views
606
H
I want to connect a diverter to the end of a wall spout but dont know if the spout has a female thread once i remove the aerator. Does anyone have any knowledge on this and if it csn be done?
Replies
0
Views
423
Hanzos
H
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock