Search the forum,

Discuss Hot water temp in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

duarab

Hi, what temp should hot water be set to on combi boiler? also if the flow is to high for the requested water temp does turning up the temp settings have any effect or does the boiler automaticaly use full power to try and achevie the temp? my boiler is a ideal combi logic+
 
adjust it to comfort - the boiler will automatically adjust to the flow rate. well should do.
 
Do not forget that the you may need to adjust things in the winter when the water off the cold main is significantly colder and the bioler
requires a temperature lift beyond the boiler capacity for a given flow rate.

centralheatking
 
Do not forget that the you may need to adjust things in the winter when the water off the cold main is significantly colder and the bioler
requires a temperature lift beyond the boiler capacity for a given flow rate.

centralheatking

not saure what you mean by this
 
Status
Not open for further replies.

Reply to Hot water temp in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock