Search the forum,

Discuss Hot water but no central heating from combi boiler? in the Canada area at PlumbersForums.net

Messages
5
Greenstar junior 24i. It's been checked a few months ago.

I haven't actually used it for central heating for a couple of years and seldom for water.

The pressure on it always goes to 0 bars after a few days and usually the filling loop is permanently attached so I would just up the pressure by turning both knobs.

So I couldn't find the filling loop, maybe the council engineer took it by mistake so I decided to use the hose/pipe from the shower.

At first the gauge didn't move so I left the pipe on and knobs open, I came back 10mins later to find water pouring out of the plastic oval shaped thing at the bottom of the boiler system, I then turned one of the knobs and the gauge went up.

So I press the heating button on the control panel for '1hr', which means it should start automatically right away but nothing, I try the same with the water and nothing however when I turn a hot water tap on the boiler fires up and I have hot water etc.

Yet I have no central heating, I have reset the control panel.

In the past I would just press the left hand button on control panel for '1hr' and the central heating would fire up.

Any ideas?
111222 is online now
 
so quoting your opening line why the hell have you got a boiler that you dont use and then want advice on how to fix it when your in social housing. havent used heating for a couple of years and seldom use hot water, what do you expect

Well it's cheaper to run a portable oil radiator. I'm poor. An engineer checks it a couple of times a year so it should be OK.
 

Reply to Hot water but no central heating from combi boiler? in the Canada area at PlumbersForums.net

Similar plumbing topics

M
Hello, We’ve recently moved into a fairly old, fairly big detached house (i.e. fairly draughty, but not too bad by any means) with a fairly new well maintained Worcester combi boiler. We weren’t convinced the heating was working right and then got hit with a £610 energy bill for the first 6...
Replies
0
Views
248
MartinPod81
M
My first thought when I heard this fault a combi boiler with hot water but no heating. Was a problem with the stat, controls not making the call for heat. If this is not the case. Can the divertor valve be the cause of the issue?
Replies
0
Views
334
I have been facing central heating low pressure on unvented hot water RM Cylinders but can't see any leak on the PRV, expansion vessels and plasterboard celling. I have got unvented pressurized RM Cylinders hot water system with 27KW Worchester gas boiler with expansion vessels . When...
Replies
2
Views
448
losing pressure
L
Hi, I have a Vailant EcoTec Boiler with a Megaflo. These are controlled by a Honeywell controller. I have one 3 port diverter, where one of the outputs goes to a 2 port diverter prior to the Megaflo (I believe this is some safety feature). I have run into an intermittent problem where some...
Replies
5
Views
226
  • Question
Have a sytem boiler with unvented cylinder with 2 heating zones plus hot water in a house we moved into recently. To start with we were always amazed at the water pressure so on the odd occasion that the water was only luke warm it was easily forgiven, but over time we have come to realise that...
Replies
8
Views
377
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock