Search the forum,

Discuss Honeywell stat advice in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
51
Can someone recommend me a simple to use remote thermostat?
Preferably a Honeywell.
Thanks in advance
 
honeywell t3r
 
What's the difference? (Never had a stat so forgive my ignorance)
One is a thermostat that will work alongside a programmer, the other is a room thermostat where you can programme different temperature set points through the day, eliminating the need for an additional programmer.
 
Last edited by a moderator:
The latter sounds like what I need, can you recommend one?
The only Honeywell stat Ive installed in a long time was the lyric t6r, nice thermostat but not the simplest of stats to use. If you want to stick with the Honeywell then I'd trust the opinion of Shaun and Chris. If you just want a simple to use stat then I can recommend these
Neomitis Wireless Digital Room Thermostat - RT0 RF | Digital Room Thermostat | PlumbNation.co.uk very easy to use and install. However, as you have to remove the boiler cover to wire the stat into the boiler, you will need a gas safe engineer to install it for you.
 
t4 is a programmable room stat eg timer and stat in one
t4r "" "" "" "" "" but wireless

t3 is a room thermostat
t3r "" "" " " but wireless
 

Reply to Honeywell stat advice in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
102
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
49
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
168
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
188
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock