Search the forum,

Discuss Hive on a direct unvented in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

townfanjon

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
8,642
Guys as above , customer has a apartment and spends a lot of time abroad ( obviously not at the moment lol ) Heating is run by a electric flowboiler and a direct unvented . He wants to run it through Hive or similar . I think the heating side will be ok but cant see how the HW will work without some sort of relay fitted , anybody any ideas . Cheers in advance
 
DP NO contactor should do the job.

 
Very easy to wire up

adaptable box wiska normally

a1 and a2 are your signal wires from your hive doesn’t matter which way the go in eg call live to a1 neutral to a2 etc

then immersion supply live and neutral into terminals 2 and 4 doesn’t matter which way but they must match there counter parts eg 1 and 3

live and neutral out to immersion on 1 and 3
 

Reply to Hive on a direct unvented in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock