Search the forum,

Discuss Help needed on central heating problem in the Canada area at PlumbersForums.net

Messages
59
Evening gents

I have a Worcester green star ri controlled by a Honeywell st9420c controller and wireless thermostat

All working fine this morning now when home from work I’m getting no heating. The light is on on the controller and the digital thermostat is showing the fire symbol but there’s no heating working at all

Hot water is heating up apparently fine and the boiler will periodically fire up and then stop again about 10 seconds later

Any ideas? Had a new grundfos pump and switch fitted 18 months ago

Thanks a lot in advance
 
Do you have a hot water cylinder and zone valves as below ? It may be a faulty head on the heating valve it may be possible to lock the head open its a common fault the motor may be burnt out or the linkage worn so not triggering the micro switch when it moved over . Kop
 

Reply to Help needed on central heating problem in the Canada area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
202
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock