I need help to identify the brand of this unit for spare parts. The plastic thread for the lever has worn out, also the shower isn't very hot now even with hot valve opened all the way.
- Thread starter Dakiloth
- Start date
- Replies 0
- Views 709
- help identifying mixer mixer showers mixer valve parts shower shower mixer spare thermostatic valves
Discuss Help identifying shower mixer for spare parts in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Reply to Help identifying shower mixer for spare parts in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Similar plumbing topics
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall)
Unfortunately turning this to the closed position only reduces...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4 times since.
It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
-
-
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 4
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-
-
Sewer pipe problems not sure about it- Started by sammie81116
- Replies: 3