Search the forum,

HELP - Identify Flow Cartridge ?

Discuss HELP - Identify Flow Cartridge ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

K

Karen B

Messages
2
Hi PF - Can anyone help identify Manufacturer of this Flow Cartridge - spindle is 71mm long, taken out using 23mm box spanner ... didn't get rest of the dims from my plumber before they put faulty part back into the wall ... have tried all usual suspects ... shower doctor, national shower spares etc etc ... drawing a blank and will have to rip out and replace whole shower if can't identify the manufacturer !!!

Any ideas out there :) ..... THANKS VERY MUCH

shower cartidge (002).jpg
 

Reply to HELP - Identify Flow Cartridge ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
165
SimonG
SimonG
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock