• Welcome to PlumbersForums.net (formerly UKPlumbersForums.co.uk). Please login with your usual username and password. Or register for free if you haven't already done so.

Discuss HELP - Identify Flow Cartridge ? in the Valves & Taps area at PlumbersForums.net

Karen B

New Member
Messages
2
Reaction score
0
Hi PF - Can anyone help identify Manufacturer of this Flow Cartridge - spindle is 71mm long, taken out using 23mm box spanner . didn't get rest of the dims from my plumber before they put faulty part back into the wall . have tried all usual suspects . shower doctor, national shower spares etc etc . drawing a blank and will have to rip out and replace whole shower if can't identify the manufacturer !!!

Any ideas out there :) ... THANKS VERY MUCH

shower cartidge (002).jpg
 

YorkshireDave

Plumber
Messages
2,280
Reaction score
969
Never seen anything even remotely like that I'm afraid. Time to start again :(
 

Forum Sponsors

Corgi - Plumbing Supplies for Professional Plumbers - Plumb Advice

Plumbase - Plumbing Parts for Plumbers - Plumbers Advice

Power Shower Booster for Power Showers - Plumbing Advice

Underflor Heating Systems by uHeat - Plumbing Advice

Wetroom Supplies by Wetroom Store

Nicobond - Wetroom and Tiling Supplies - Plumbers Installation Advice

Corgi - Plumbing Supplies for Professional Plumbers - Advice for Plumbers

Top Bottom