Search the forum,

Discuss HELP! Ideal mini C-24 hot water problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

alexz

Hi, guys
Need urgent help with my Ideal mini C-24 boiler which is 5 years old.
While ago problem started, I had two boiler engeneers look at it, but they couldn't find fault.:eek:
Here is the problem :
Hot water temperature is very low. When heating is off and hot water on boiler is firing on for 20 seconds, then off for 20 seconds, then on again, etc.
When CH is on - same story but with intervals of about 25-30 seconds and water temperature bit higher.
If hot water tap is not opened fully, I can get constant warm (not hot) water.But when CH is on pressure rising constantly (in 1-2 hours to 3 bar), so I have to bleed nearest radiator.
All boiler lights indicate normal work.
Please, if anyone can help me to distinguish the problem, you can save whole family.:eek:
Regards
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to HELP! Ideal mini C-24 hot water problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock