Search the forum,

Gas valve Vaillant eco tec pro 24

Discuss Gas valve Vaillant eco tec pro 24 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Atanas Peev

Atanas Peev

Gas Engineer
Messages
16
Hello any with experienced with gas valve low voltage The boiler is Vaillant eco tec pro 24 I’ve got a code F61 and voltage to gas valve solenoid is 4.51v dc
Regards Atanas
 
A gas safe engineer will be able to diagnose and repair your boiler we cannot give you any advice regarding gas repairs in the public domain on this forum . Apologies kop
 
He is gas safe lads and tbh don’t know what happened but it appears he’s lost the gsr badge as I’m sure I’m the one who processed it :D
[automerge]1571524819[/automerge]
Check the voltage at the board if the voltage is good there then loom is probably bad if not
Then I would suspect the pcb
 

Reply to Gas valve Vaillant eco tec pro 24 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
167
ShaunCorbs
ShaunCorbs
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
203
Chuck
C
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
147
johndave
johndave
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Chuck
C
P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
172
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock