Search the forum,

Discuss Gas portfolio advice? in the Canada area at PlumbersForums.net

Messages
6
Hi,

I am at the end of my Gas engineering course and have completed a majority of my portfolio work and exams. To finish off, I need to have completed 3 boiler serviced & installations which need to be signed off by a gas registered engineer. We’ve been left to our own devices in finding gas engineers to help with this and I am struggling. I’ve contacted so many people but they all say they can’t help with that.

Does anyone have any advice on how to go about finding a gas engineer to work alongside for a day to watch me to a boiler installation?

I am not looking to do those ‘portfolio building courses’ as I do need require half of the stuff they offer.

Thanks in advance,
Soud
 
It's establishing another competitor in an already crowded marketplace. Once you are established you will see this too.
Keep trying. It's hard for a late starter to break through, especially if you know nobody. Good luck.
 
It's establishing another competitor in an already crowded marketplace. Once you are established you will see this too.
Keep trying. It's hard for a late starter to break through, especially if you know nobody. Good luck.
Yeah seems to be becoming more difficult. Thanks though buddy
[automerge]1574432313[/automerge]
Where are you based?
I’m based in North London- Edmonton
 

Reply to Gas portfolio advice? in the Canada area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
4
Views
197
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
346
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
208
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
47
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
289
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock