Search the forum,

Discuss Gas Boiler 0 pressure in the Central Heating Forum area at PlumbersForums.net

Messages
5
Hi, was wondering if I should turn my gas boiler off and on, it's a new boiler in a new build house, it's been going fine for a few weeks but it's flashing 0 bar on the display, the pressure gauge red needle is at 4 bar and the black is at 0.5 bar just not sure what to do before contacting the people that installed it on Monday, any advice appreciated
 
Need to top the system up where the guage is there should be a silver flexi attached to it with two valves open one and open the other slightly until you hear water moving / noise now watch the black on the guage 1-1.2 you can close both valves again and you should be good
 

Reply to Gas Boiler 0 pressure in the Central Heating Forum area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock