Search the forum,

Discuss G3 heating specialist in Norwich in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
185
I have just moved in to a 30s house in Norwich, and plan to install one of these:

It will replace a vented system.

I am looking for someone G3 certified to commission the tank, and to provide annual inspection and boiler service (currently an Ideal FF360).
 
I am still looking for a G3 in Norwich.

In this thread I posted a possible plan of what I would like to do:

It is with a plate exchanger for DHW, but I would also be OK with a large internal coil like the OEG above. I am open to suggestions, provided the solution buffers the central heating.

On the diagram I would like someone to do the part on the left, because it is legally difficult for me to do it, and I would do all the stuff on the right. I need someone to hook the boiler to the tank, make it safe and notify it. I also need to purchase the tank and all the pipe and fittings, so I would need an offer for all that as well.
 
Last edited:

Reply to G3 heating specialist in Norwich in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All, We have finally decided after a bit of a persuasion to have installed a utility room in our garage that currently houses our oil boiler. Initially we thought the boiler may stay in place but after discussions with the builder we would have to move the boiler to replace the floor and...
Replies
7
Views
828
We live in a 1980s four-bedroom detached house. The time has come for new central heating. The current system is a mild revision of the original heating installed when the house was built, and this revision was largely to replace a life-expired boiler: non-condensing fan flue boiler open...
Replies
13
Views
2K
Hi all, I'm a competent DIYer with an engineering background and am active in Heritage Buildings. I never touch anything I'm not allowed to albeit I've worked on the wet side of my own heating on the central heating circuit before when I had a combi - balancing rads, add a Fernox TF1, washing...
Replies
1
Views
560
I'd like to install an unvented cylinder in the loft. With limited headroom it would have to be horizontal. I want to keep my existing valiant condensing boiler. I currently have a vented set up. A couple of plumbers said this could work. Will the feed and expansion tank for the central...
Replies
10
Views
1K
Hello all, I should start off by stating that I'm not in the industry - I'm just a DIYer with a "what-if" idea. Hybrid systems and solar diverters are nothing new, but as far as I can see the current hybrid systems all require a change of boiler and I'm going to propose a system which could use...
Replies
6
Views
1K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock