Search the forum,

Discuss Foghorn/Splutering from cistern! Video attached in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
13
Hi all,

Had a toilet installed recently which is now making the attached sound. (No chance of him coming back to sort it...)


Anyone know what's causing it? Issue coming from whatever that piece is on the right hand side (please let me know).

Cheers
 
New inlet valve required
 
New inlet valve required
Thanks Shaun.

Any recommendations? I seen someone mention a Fluidmaster side-entry brass shank valve as being better (20e from Screwfix).

Additionally.. easy enough to change out? I'm okayish (last plumbing endeavour was taking apart an upstairs toilet to change the o-ring due to not filling quickly - took me a while to figure out what the issue was!).
 
Yes perfect or a viva side / 4 in 1

Just turn / isolate the water first
 
tbh cheap or defective
 

Reply to Foghorn/Splutering from cistern! Video attached in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
118
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
207
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
168
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
118
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
255
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock