Search the forum,

Discuss Fluidmaster concealed cistern in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Matt0029

Gas Engineer
Messages
1,103
Are these connectors any good that come with the fluidmaster concealed cistern they seem to move still when tight. Thanks
 

Attachments

  • IMG20230517161715.jpg
    IMG20230517161715.jpg
    362.4 KB · Views: 8
Normally use a angled 1/2 valve (I know you can’t use it but it’s easiest way to adapt) then a valve lower down if you choose to etc
 
A bent service valve was no good as couldn't really get to turn the iso off on it. The plastic thing seemed really flimsy
 
A bent service valve was no good as couldn't really get to turn the iso off on it. The plastic thing seemed really flimsy

No but if you install an iso below you won’t have to touch it and it’s an easy thing as most have them

They make 90 degree flexis monster plumb do them I think
 

Reply to Fluidmaster concealed cistern in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock