Search the forum,

Discuss Firebird Combi CH Not working in the Oil and Solid Fuel Forum area at PlumbersForums.net

Messages
1
Evening Gents. That time of year again the wife has demanded the CH Be turned on.

However, im having an issue with it - It simply isnt turning on.

The LED On the front panel illuminates to suggest the CH Has been turned on by the boiler, but nothing happens.

The HW works perfectly normal.

If i cycle the power (Reset) the boiler. Turn CH On via the Timer and the the burner starts for around 60 seconds and then turns off.

I have Bypassed the timer to rule that out as faulty (I replaced it with a HIVE Wireless unit earlier this year - CH Worked when i installed it)

Any suggestions on what i should be checking next?
 

Attachments

  • 316476713_634174158491700_1152172398146342722_n.jpg
    316476713_634174158491700_1152172398146342722_n.jpg
    491.3 KB · Views: 6
  • 312598058_1156615845229767_7795950210255731816_n.jpg
    312598058_1156615845229767_7795950210255731816_n.jpg
    445.9 KB · Views: 6
  • 312309490_509304594584366_7077003216263407451_n.jpg
    312309490_509304594584366_7077003216263407451_n.jpg
    609.3 KB · Views: 6

Reply to Firebird Combi CH Not working in the Oil and Solid Fuel Forum area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
5
Views
125
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
108
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock