Search the forum,

Discuss Estimated size calorifier in the Commercial and Industrial Plumbing Forum area at PlumbersForums.net

Messages
3
Hi, what estimated size calorifier would be needed for a 5200 square meter college building.
 
The Design Consultant would also need more information about the buildings use.
Is the College for Food or Beauty / Hair related courses, where high volumes of hot water would be used?
Or other courses where there's a lot of hand washing involved or Sport related where showering would have a high demand?

Is the building a tower or is it spread out meaning more than 1 Calorifier may be more economical?
 
The Design Consultant would also need more information about the buildings use.
Is the College for Food or Beauty / Hair related courses, where high volumes of hot water would be used?
Or other courses where there's a lot of hand washing involved or Sport related where showering would have a high demand?

Is the building a tower or is it spread out meaning more than 1 Calorifier may be more economical?
Its an applied science and IT building spread over 5 floors. there is approx. 1000 students occupancy. There is 5 floors with 10 rooms approx on each with about 2 rads in each, so about 100 radiators. would a 500L calorifier be enough?
 
Last edited:
the calorifier is for hot water so you need amount of washbasins bathrooms and kitchens also washing machine, dishwashers anything that uses hot water
 

Reply to Estimated size calorifier in the Commercial and Industrial Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
180
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
185
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
276
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
186
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
471
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock