Search the forum,

Elson Sapphire double feed indirect hot water tank

Discuss Elson Sapphire double feed indirect hot water tank in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

F

Fountainspring

Messages
3
Hi,

I have a fairly modern multifuel stove with a back boiler connected to a Elson Sapphire double feed indirect hot water tank and I need to drain down the system to move a radiator.

Would anyone be able to offer any advice as to the correct drain down and refill procedure for this tank as they only have a single cold feed cistern for the Domestic Hot Water side, the primary indirect Central Heating feed and expansion from the back boiler seems to be internal to the tank and from what I can gather is a type of primatic or spartan vessel.

Any advice would be much appreciated!
 
Last edited:

Reply to Elson Sapphire double feed indirect hot water tank in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

M
Boiler pressure is rising? Did indirect hot water tank coil fail?
First post as I can not figure this one out. I have a hot water boiler heating system, gas fired, with an HTP SuperStor indirect hot water tank. I'm on well water and have a water softener and two whole house filters for my water. Three days ago I found my high pressure relief valve tripped...
Replies
2
Views
366
mikeshums
M
F
Elson Sapphire - Drain Down and Refill Procedure
I have an Elson Sapphire double feed indirect hot water tank and I need to drain down the system to move some radiators. Would anyone be able to offer any advice as to the correct drain down and refill procedure for this tank? It is a self contained boxed and insulated unit with a single cold...
Replies
2
Views
1K
Fountainspring
F
C
2 cold feeds to indirect hot water tank
Hi, I am reinstating an indirect hot water tank and have 2 cold water feeds coming into it from the same supply. One of the feeds has a float valve but what ever was on the other has been removed. Why would there be 2 feeds to the top of the tank? Can I blank one off and just use the float valve...
Replies
5
Views
871
chrispoole
C
E
Loss of Hot Water Pressure to Shower
Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air gap as I was having dripping from the pressure relief valve. Since then I've lost a lot of pressure from the hot water feed to my shower. The rest of...
Replies
8
Views
269
John.g
J
T
Delaying the fill on a loft cold water tank - electric and mixer showers running at once
Hello, and thanks for taking the time to read. I'm trying to work out if the idea I have is practical? The water pressure in my newly renovated house (4 bathrooms is tragic). Current set up is: A hot/cold mixer in the main ensuite which is ok as long as you don't run anything else. One electric...
Replies
3
Views
368
tryingmybest
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock