Search the forum,

Dual flush syphon unit to slot into cradle of Bathstore A2432 model?

Discuss Dual flush syphon unit to slot into cradle of Bathstore A2432 model? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

D

David R

Messages
3
The syphon activation cable on my old Bathstore A2432 dual flush valve has broken and I don't want to have to remove the whole cistern to replace the the complete unit. Does anyone know of a replacement valve the syphon part of which Dual flush 1.8 (1).JPGDual flush 1.8 (2).JPGDual flush 1.8 (4).JPGDual flush 1.8 (5).JPGI can use to slot into the existing cradle, please? I hope the photos help and the diameter of the cradle is 3 inch (7.6mm).
 

Reply to Dual flush syphon unit to slot into cradle of Bathstore A2432 model? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
127
Stigster
Stigster
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
308
Timmy D
T
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
173
SimonG
SimonG
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
251
ShaunCorbs
ShaunCorbs
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
365
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock