Search the forum,

Discuss Dripping Rain Shower. Any advice? in the USA area at PlumbersForums.net

Messages
4
I have a ceiling fitted shower that keeps dripping and is driving me crazy.
Can anyone offer any guidance to what’s causing the problem and how it can be fixed.
Would the ceiling need to be damaged to get access to the pipe work?
Many thanks.
 

Attachments

  • B1BA5862-3C53-4C06-AE53-A0C935336361.jpeg
    B1BA5862-3C53-4C06-AE53-A0C935336361.jpeg
    371.7 KB · Views: 9
I have a ceiling fitted shower that keeps dripping and is driving me crazy.
Can anyone offer any guidance to what’s causing the problem and how it can be fixed.
Would the ceiling need to be damaged to get access to the pipe work?
Many thanks.
I have recently changed the shower head, so I don’t think there’s a problem with that. I also took the shower head off and the dripping continued from the pipe.
 
The problem isn't in the ceiling, it's the valve in the wall not sealing properly. Isolate the water and change the valve. Find a maker's mark and look up how to change the valve.
 
The problem isn't in the ceiling, it's the valve in the wall not sealing properly. Isolate the water and change the valve. Find a maker's mark and look up how to change the valve.
I have a ceiling fitted shower that keeps dripping and is driving me crazy.
Can anyone offer any guidance to what’s causing the problem and how it can be fixed.
Would the ceiling need to be damaged to get access to the pipe work?
Many thanks.
So it’s likely the valve behind the on/off control? Can the valve be replaced without damaging the tiles?
 

Attachments

  • 7640610D-ED4F-40C9-892B-C38660E4DC35.jpeg
    7640610D-ED4F-40C9-892B-C38660E4DC35.jpeg
    305 KB · Views: 5

Reply to Dripping Rain Shower. Any advice? in the USA area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
207
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
233
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
184
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
116
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
174
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock