Search the forum,

Discuss Does anyone recognise this bath filler? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
1
This bath filler/overflow is supposed to turn to divert water flow to a shower above. It’s not clicking across anymore. Does anyone recognise it? Fitted in 2014. It was installed together with this Bristan inbuilt thermostatic controller.
 

Attachments

  • 936ED176-AF0D-4C7B-B2D5-A1436C12D836.jpeg
    936ED176-AF0D-4C7B-B2D5-A1436C12D836.jpeg
    111.1 KB · Views: 17
  • 693A023D-4C90-4AAC-9FF2-D52579E52053.jpeg
    693A023D-4C90-4AAC-9FF2-D52579E52053.jpeg
    302.8 KB · Views: 18
  • BBF01121-2208-4202-8A3F-7987697E3355.jpeg
    BBF01121-2208-4202-8A3F-7987697E3355.jpeg
    231.5 KB · Views: 17

Reply to Does anyone recognise this bath filler? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
Replies
2
Views
80
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
53
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
192
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
175
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
141
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock