Search the forum,

Discuss Do you know this shower make and model? in the USA area at PlumbersForums.net

Messages
18
Would anyone know the make and model of this shower, I would like to replace it, as the temperature bit has broken off and cannot be screwed back on. A plumber said it would be lots easier if we could replace like for like. This showed was already in the house before we moved in.
 

Attachments

  • 16234199552977103657110725779993.jpg
    16234199552977103657110725779993.jpg
    234.2 KB · Views: 10
  • 16234199916346606572160270261657.jpg
    16234199916346606572160270261657.jpg
    302.6 KB · Views: 7

Reply to Do you know this shower make and model? in the USA area at PlumbersForums.net

Similar plumbing topics

S
I have a dead 1990s Triton T70 shower and, for purposes of replacement, I'd like to know if it's mains or gravity fed. As it won't even switch on, I cannot get any water out of it so I can't just switch off water at mains and see if water still flows from the shower. I note that current Triton...
Replies
2
Views
348
Hi All As you can see from the attached pix, the flow control knob on my Bristan shower has broken. It was installed before I bought the house (possibly between 2015 and 2017) but I've no idea what model it is. Firstly, can anyone help me to identify it to see if I can get a replacement knob...
Replies
1
Views
237
We have a gravity fed hot water system in our the house we have just recently moved into. It works fine with the downstairs shower, however we are about to upgrade the upstairs bathroom and are considering installing a shower bath. My concern is that although there is more than sufficient...
Replies
15
Views
662
Hi all I had a new bathroom fitted about 4 months ago and all was fine until about a week ago. But now when I turn the lever to run the rain head there is a 30s delay until water starts coming out , very slowly then builds up to the flow I would expect. ( I can hear water running and filling up...
Replies
4
Views
170
Hello, I have a customer with a modern anthracite vertical radiator and a modern TRV and lockshield. The radiator makes a loud metallic bang from within the radiator, when it heats up and cools down. I have opened the lockshield fully, lowered the boiler pressure from 2.5 bar to just over 1...
Replies
1
Views
312
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock