Do I need a new fitting?

[Sarah Curtis]

Hi,

I bought and fitted a new dishwasher the other day, but after fitting the inlet water pipe and waste pipe I noticed the fixing that joins the waste pipe to the rest of the pipes (the multiconnector I think it’s called) seems to be leaking water out of the side as there’s a very small gap when I’ve screwed it back on.

Image attached.

Do i need a new fixing or have I not reattached it correctly?

Thanks

Do i need a new fixing or have I not reattached it correctly?

Thanks
Sarah

 

[Sarah Curtis]

Video here too on my Dropbox if it helps:
Dropbox - IMG_2387.MOV

 

[Harvest Fields]

Yes. The nut looks like it has a crack in it?

 

[Sarah Curtis]

I think that’s a mark on the photo.

I also just screwed it on tight and end of the pipe comes out anyway so it’s not actually doing anything.

 

[Ben-gee]

Have you got the conical black rubber washer on it?

 

[Sarah Curtis]

Do I have all the right parts here? Sorry I’m asking really obvious questions.

 

[Sarah Curtis]

Have you got the conical black rubber washer on it?

No it doesn’t look like it.

 

[Ben-gee]

That is what you need to stop it leaking!

 

[Sarah Curtis]

That is what you need to stop it leaking!

Ok, makes sense to tighten it up! I take it this would sit around the piping where it connects up?

Is there any chance you can send me a link to an example of what I need to buy so I get the right thing?

 

[Ben-gee]

It could be wedged inside the fitting, where you screwing the nut on. Remove it. No place it on the pipe.
It goes: nut, red ring , black conical washer( flat side nearest the red ring, sloping side into the fitting

 

[Sarah Curtis]

It could be wedged inside the fitting, where you screwing the nut on. Remove it. No place it on the pipe.
It goes: nut, red ring , black conical washer( flat side nearest the red ring, sloping side into the fitting

Great thank you, I’ll check and give it a go.

 

[Sarah Curtis]

It could be wedged inside the fitting, where you screwing the nut on. Remove it. No place it on the pipe.
It goes: nut, red ring , black conical washer( flat side nearest the red ring, sloping side into the fitting

Found it underneath the kitchen unit! ‍
Thank you very much - that’s solved it.

 

[Ben-gee]

Goodo, you’re welcome.

 

[townfanjon]

Sarah , one last thing, get a jubilee clip on the end of the grey hose where it joins the white fitting

 

[rpm]

Sarah , one last thing, get a jubilee clip on the end of the grey hose where it joins the white fitting

22-25mm clip Jon?

 

[townfanjon]

22-25mm clip Jon?

Nats bigger I think , I have some that go 20 to 30 or thereabouts