Search the forum,

Diverter head plant room

Discuss Diverter head plant room in the Commercial and Industrial Plumbing Forum area at PlumbersForums.net

A

Aiplumbinggas

Messages
12
Hello
Can anyone help me identify this actuator head. It’s making noise, heat not passing through ?
 

Attachments

  • 1DB6C641-9747-45E5-8D7C-A464C70A1AA1.jpeg
    1DB6C641-9747-45E5-8D7C-A464C70A1AA1.jpeg
    621.9 KB · Views: 19
  • 57A9C0E0-6E61-4CF1-AA8D-CD825609B7D1.jpeg
    57A9C0E0-6E61-4CF1-AA8D-CD825609B7D1.jpeg
    406.9 KB · Views: 17
  • 88C451C4-C5FE-4CE9-A401-24595DA2FB59.jpeg
    88C451C4-C5FE-4CE9-A401-24595DA2FB59.jpeg
    477.5 KB · Views: 18
Marking / data plate on top ?
 

Reply to Diverter head plant room in the Commercial and Industrial Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
224
John.g
J
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
230
exedon2
exedon2
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
276
oz-plumber
O
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
91
Lou
Lou
C
    • Like
Newbie on site....Saying hello to all.
Hello to everyone.Im a newbie here. plumbing & heating+GSR engineer.
Replies
2
Views
69
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock