Search the forum,

Discuss Decent 9.5kw electric shower? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

macka09

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,226
Hi guys, I don’t really fit many electric showers so I’m looking for some recommendations for a replacement for a Triton Cara please? Cheers
 
remember to make sure you get the same wattage, you can not just put a higher one in with out doing the maths.
 
I prefer Mira, based mostly on a bad experience with Triton trying to shirk its duties under the Consumer Rights Act or Sale of Goods I think it was then (had to get Trading Standards involved) a few years ago.

But I think there is a difference: Triton showers used to have 2/3 wattage at low heat setting whereas Mira seems to tend to have 1/2 wattage at low heat setting. Worth checking this detail and seeing if it is still the case!
 

Reply to Decent 9.5kw electric shower? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
207
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
116
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
255
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
160
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
174
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock