Search the forum,

Discuss D.I.Y. Boiler replacement for my Grandmother. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

retep37

My Grandmother has to have a replacement boiler fitted in to her kitchen at her massive detatched 12 bedroomed house in Twickenham ,London.The original one was a Ravenheat 75 Kw output boiler which was ok when it ran ,need I say more!,so between us we rang a few of these so called swaggering chip on the shoulder Sheriff of Nottingham style gas engineers that strut around like they work for that other shower called British Gas locally & decided upon using a fitter from East Ham who seemed to be so nice & polite on the phone,any way he said he would come round and give us an estimate one day so 6 weeks later he arrived with his bass(not the fish) and proceeded to assess the situation,the strange thing was when I asked him for his Gas Safe Registration his reply was that he was a Euro Greyhound registered Gas safe approved Technician 1st class engineer which he said meant Gas registered European yardstick for housing & National developments,I thought this seemed rather strange as I had not heard of this type of reg before(I am a fully qualified Electrician to Approved standard),also he was covered from head to foot in like a black carbon soot like residue with that distinctive smell of something that had been severely scorched,any way after about half an hour he produced an estimate and handed it to me ,God above I nearly collapsed ,it stated for the days work involved it would cost my dear old Grandmother about £ 500 just for labour only,well that finally did it to think that he had the downright audacity & blatent cheek to charge a poor old lady £500 just to turn off the gas , swap an old boiler over and re connect a few pipes so I told him to get off this property before I break both your bloody legs , ram that bass up somewhere you so called gas safe legalised crook, and stretch that bending spring tight round your gas safe corrupt kneck, never seen any body run so fast from a mansion when I mentioned the Police,so the final question of this saga is can I do the work myself as she has only a pension & about £11 million worth of shares etc.?
 
Re: D.I.Y boiler swap

Welcome to the forum, secondly don't post three times the moderators look at that as spam Thirdly no you can't is the simple answer. You might have written this in anger but £500 for a boiler swap is pretty cheap for the work involved. What you see as just swapping a few pipes over is in fact somebody taking responsibility for the installation of a device that can potentially kill you. Based on a few things you put on this thread I am thinking it's probably a wind up.
 
Re: D.I.Y boiler swap

I feel one of the moderators will be along shortly
 
Re: D.I.Y boiler swap

Wind up.
God I wish people would paragraph long posts.
 
Re: D.I.Y boiler swap

lol, only 11 million.. almost broke eh ;)
 
No. No and thrice no.

Don't duplicate posts. It's spam and extremely tedious.

And I've just tidied it all up.

Answer's still no.



However if a commercial boy has quoted 500 notes to swap a commercial sized boiler, you should chew his arm off.

I charge that just to answer the phone.......
 
Status
Not open for further replies.

Reply to D.I.Y. Boiler replacement for my Grandmother. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Had our gas Baxi Combi inspected and serviced today, as it has been every year. Gas safety cert issued and says all okay, but engineer gave what I think was very... ambiguous... advice. 12yo boiler with the following readings on the analyser printout: O2% = 4.1 CO ppm = 192 CO2% = 9.5 Ratio =...
Replies
4
Views
550
Not sure what my options are here. Basically a friend of mine recommended his father in law to do our plumbing/gas work for our renovation. First job was to install a new boiler, and later install radiators, bathroom, kitchen, etc. The boiler was installed last September but not switched on as...
Replies
18
Views
2K
Hi all Wondering if you could help with this strange issue. I have a Vaillant ecotec 637 (set to 20kw part load) which was connected via a LLH to my system of 3 zones; DHW and 2 radiator zones. The gas usage was high and didn’t feel the boiler was modulating, so yesterday I decided to remove...
Replies
57
Views
3K
Hi, I have a Y plan open vent system, boiler 30+ years old, and requires replacement. My plumber is recommending fitting a new Viessmann 11kw System boiler in the current boilers position. The problem is he plans to run two new separate pipes fro the boiler to the hot water cylinder. Once this...
Replies
5
Views
695
Hi, I am a homeowner but caught between a rock & a hard place. I am trying to get a Vaillant ecoTEC 630 plus serviced but the gas safe engineer & Vaillant engineer say one thing, whilst the SGN engineer says another. I do not know how to proceed and would value some informed advice. The rock...
Replies
8
Views
1K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock